Remote Control Guides

In order to use many of the TiVo features the remote control must be paired with the receiver it is used on. Follow the directions below to properly pair your remote to its TiVo Receiver, your TV, and/or your Audio Video Receiver.

To put the Remote Control in Programming mode:

• Press the TiVo button on the remote
• Select Menu from the home page
• Choose Settings
• Choose Remote CableCard & Devices
• Choose Remote Control Setup
• Then continue with the device specific directions below.

For pairing to the TiVo Receiver:

• Choose Remote Control Pairing
• Follow the on-screen instructions

For pairing to the TV:

• Choose Set TV Power, Volume and Mute
• Select your TV Brand and press OK
• Take note of the Remote Control Codes highlighted in blue
• Hold down the TV Pwr & TiVo buttons at the same time until the light at the top of the remote remains lit and enter one of the 4-digit remote codes
• Press TV Pwr, if the TV doesn't turn off return to the previous step and try another 4-digit code
• If none of the available codes work click here for instructions on how to search for the code for your device

For pairing to an Audio/Video Receiver:

• Choose Set AV Volume and Mute
• Select your Audio Receiver Brand and press OK
• Take note of the Remote Control Codes highlighted in blue
• Hold down the MUTE & TiVo buttons at the same time until the light at the top of the remote remains lit and enter one of the 4-digit remote codes
• Press Mute, if the audio doesn't Mute return to the previous steps and try another 4-digit code
• If none of the available codes work, click here for instructions on how to search for the code for your device

To program your remote control, please do the following:

• Turn on the device (TV or AUDIO)
• Press and hold the MENU and OK buttons until the Power Button flashes, then release both buttons.
• Enter 9 9 1
• Press 1 to search for a TV Code or 3 to search for a Audio Device Code. The power button should again flash twice after the 1 or the 3.
• While aiming the remote at the device press and release the Cursor Up button repeatedly until the device turns off.
• Press OK to lock in the code when the device turns off. The power button will again flash twice.

You have now programmed your remote to control your device.

NOTE: The remote control comes pre-programmed for your digital receiver.

To program your remote control, please do the following:

• Turn on the device (VCR, DVD, Home Theatre, etc.)
• Press the device button (VCR, DVD, AUX (Home Theatre or other device), TV, CBL)
• Press and hold the Setup button at the top left comer of the remote until the device button blinks twice.
• Press 9-9-1 (The button should blink twice)
• Press Power
• Point the remote at the device and press CH+ repeatedly until the device turns off
• Press the Setup button when the device turns off

You have now programmed your remote to control your device.

NOTE: The remote control comes pre-programmed for your digital receiver.